Automatic autoclave

AUTOMATIC AUTOCLAVE

CLASS N, NON-VACUUM

General Features

  • Full automatic table top autoclaves with pre-programmed sterilisation cycles
  • Stainless steel chamber and door, with electro-polish finish
  • High precision control system for prefect sterilisation results
  • Built-in independent steam generator provides readily available steam for faster cycles
  • LCD screen, displays continuous information about cycle process
  • Open-type water tank that is very easy for filling and cleaning
  • Internal memory: the last 20 cycles information can be automatically stored in the autoclave system, which can be printed out at any time

Safety Features

  • Cycle will not start unless the door is properly locked
  • Pressure safety valves prevent over pressurisation of chamber and generator
  • Safety thermostat prevents over heating in the chamber and generator
  • Leak protector will cut power automatically in the rare event of a short circuit or unstable power supply
  • If your cycle fails, error codes are given to pin point the issue. Sometimes as simple as leaving a door unlocked or the water level is too low or high.

Optional Accessories

  • Automated double locking safety device prevents the door from opening while the chamber is pressurised (optional)
  • External printer prints detailed cycle program information (optional)
  • USB port & USB stick: all cycle information is automatically written in the USB stick and can be read directly in any PC (optional)

 EAC-N08EAC-N16EAC-N18EAC-N23
Chamber dimension (mm)Ø170 x 320Ø230 x 360Ø247 x 350Ø247 x 450
Chamber volume (Litre)8181823
Number of trays2333
Electrical230V 50Hz 1400W230V 50Hz 2100W
Overall dimension (WxHxD mm)370 x 345 x 565445 x 400 x 690480 x 465 x 690480 x 465 x 690
Autoclave weight (kg)31414850
ProgramTemperature (°C)Pressure (Mpa)Sterilisation time (min)Total time (min)
SOLID134210415-25
1211102025-40
LIQUID1342101025-50
1211103030-55
WRAPPED1342101020-45
1211103030-50
TEXTILE1342101020-45
1211103030-50
PRION1342101830-50
DRYING///1-20
B&D TEST1342103.522-35
HELIX TEST1342103.522-35
VACUUM TEST///15-20

The "DRYING" program is optional, if choose this program, it will replace the "TEXTILE" program.

Automatic vacuum autoclave
AUTOMATIC AUTOCLAVE

CLASS B, VACUUM EN13060

Z Series Autoclave
Z Series Autoclave
AUTOCLAVE

Features

  • Fully stainless steel structure
  • The cover can be opened easily
  • Bevel designed control panel, easy to operate
  • Microprocessor control, LED display
  • Audio and visual alarm for low level water, automatic water supply system
  • Gravity exhaust control ensures a pure steam environment
  • Over-temperature protection, precision of temperature within ±0.5°C
  • Immersion heater ensures a high effective thermal
  • The temperature setting is adjustable, and the highest temperature can reach to 126°C.

Cat. No.EBK-Z030EBK-Z050EBK-Z075EBK-Z100
Capacity30L50L75L100L
Water supply pressure≥0.2 Mpa
Working pressureAlong with temperature range
Working temperatureConfigurable from 121°C to 126°C
Temperature fluctuation≤1°C
Electrical230V 50Hz
Consumption3KW3.8KW
External dimensions (LxWxH)700 x 510 x 730mm700 x 510 x 820mm700 x 510 x 930mm700 x 510 x 1040mm
Package dimensions (LxWxH)770 x 650 x 820mm770 x 650 x 960mm770 x 650 x 1060mm770 x 650 x 1160mm

These autoclaves are for research and veterinary applications. These instruments have approval for use in human hospitals and surgeries in many other countries, but we have not applied for approval from the TGA in Australia or NZ.

EBK-Z030
Autoclave, Z series, 30L
ea
QUOTE
EBK-Z050
Autoclave, Z series, 50L
ea
QUOTE
EBK-Z075
Autoclave, Z series, 75L
ea
QUOTE
EBK-Z100
Autoclave, Z series, 100L
ea
QUOTE
Infrared steriliser 14mm opening
Infrared steriliser 14mm opening
Infrared steriliser 35mm opening
Infrared steriliser 35mm opening
INFRARED STERILISER

This infrared steriliser is designed for benchtop sterilisation of research microbiology tools. It evolved from the original BactiCinerator™/BactiZapper™ and is particularly convenient when frequent sterilisation of innoculation loops is required and when gas for bunsen burners is not available. Infrared heat produced by an asbestos-free ceramic core element is close to 815°C and completely sterilises microorganisms in 5-7 seconds. The instrument requires little bench space and reaches high temperature in a few minutes. For rapid sterilising of tweezers and scissors without losing temper steel temper, see our glass bead steriliser.


This infrared steriliser uses well-proven technology to provide instant sterilisation of platinum inoculating loops, needles, glass tube/pipette mouths and various metal & borosilicate glass instruments, commonly used in microbiology research.


The ceramic heating element is safely enclosed in a perforated stainless steel guard chamber, protecting users from accidental contact with the extreme temperatures of the core area. It is compact, convenient and can be used in anaerobic and aerobic chambers.


The replacement heating element consists of the core and the steel guard chamber. The old 'head' is easily removed by undoing the hex screws at the top of the stem and uncoupling the 2 wires.


Features

  • Sterilises needles, loops, and culture tube mouths in five to seven seconds at optimum sterilising temperature of 815.6°C
  • Ceramic funnel tube enclosed in stainless-steel perforated guard and stainless-steel support stand


Specification

Cat. No.EA900-14EA900-35
Maximum temperature815±50°C
Internal diameterØ14mm

Ø35mm

Internal length140mm

100mm

Net weight1.3Kg
Dimensions (D x W x H)185 x 98 x 190mm

158 x 98 x 225mm

ElectricalAC230V 50Hz

Infrared steriliser holder attachment
Holder attachment
Infrared steriliser slide dryer and loop holder attachments
Slide dryer, loop holder attachments
Infrared steriliser heater replacement
Replacement heater
EA900-14
Infrared steriliser, L140mm, ID14mm
ea
QUOTE
EA900-14-HE
Replacement heater, 230V, for EA900-14
ea
QUOTE
EA900-14-HO
Slide holder attachment, for EA900-14
ea
QUOTE
EA900-35
Infrared steriliser, L100mm, ID35mm
AUD380.00
ea
ADD TO CART 
EA900-35-HE
Replacement heater, 230V, for EA900-35
ea
QUOTE
EA900-35-HO
Slide holder attachment, for EA900-35
ea
QUOTE
EB0900-HE
Replacement heating element, 230V
50% DISCOUNT FOR 1
AUD225112.50
ea
ADD TO CART 
EB0900-LH
Loop holder attachment, for EA900-14
30% DISCOUNT FOR 1
AUD7854.60
ea
ADD TO CART 
EB0900-SD
Slide dryer attachment, for EA900-14
30% DISCOUNT FOR 1
AUD145101.50
ea
ADD TO CART 
Glass bead steriliser
Glass bead steriliser
CE compliant
CE compliant
GLASS BEAD STERILISER

A glass bead steriliser is a quick, easy and accurate alternative to traditional methods of sterilisation. Once switched 'ON', the unit is ready to use within 15 minutes and ensures total sterilisation by destruction of all microorganisms within 10 seconds. It has a stainless steel body, and a thermostat maintains the temperature at 240°C - 260°C.


The steriliser is compact enough to be placed on a laminar air flow work bench or any other work surfaces in a clean room atmosphere.


Rationale for the glass bead sterilizer: dry heat at these temperatures effectively incinerates all microorganisms. Tiny glass beads conduct heat much better than air and so sterilisation of instruments is very rapid. The temperature is not too high to ruin tempered stainless steel and discolour instruments. This instrument is ideal for sterilising the working end of scissors, tweezers and other instruments for use in laboratory operations, and veterinary practices.

Specifications

Crucible sizeØ 40mm x depth 80mm
Preset temperature range240°C ~ 260°C
Initial temp. stabilisation time10 min
Size and weight of glass beads2mm x 40g
Dimensions (D x W x H)130 x 132 x 175mm
Packed weight4.5kg
EA910
Glass bead steriliser
AUD442.00
ea
BACKORDER 
EA910-GB
Replacement glass beads, 2mm, for glass bead steriliser
200g
QUOTE
Order Type / Payment Method / Address / Shopping Cart / Checkout