Probe thermometer
EHI98501
PROBE THERMOMETER

Checktemp gives a temperature readout from -50 to 150°C in seconds on a large LCD with ±0.3°C accuracy. NO breakage, no waste, no injuries, no difficulty in reading. Not even a parallax error by taking the wrong measurement due to the angle of view.
Checktemp incorporates the unique Calibration Check function; simply activate the proper switch and the instrument will simulate 0.0°C signal that has to be read on the LCD within a range of ±0.3°C. This system guarantees the accuracy of your measurement at any time.
The sharp-tip probe can easily penetrate semisolid products such as fruits, vegetables and cheese, making routine controls simple and quick for both incoming and outgoing goods. The AISI 316 stainless steel material of the probe is in compliance with food regulations.
Checktemp is the ideal instrument for measuring temperature according to HACCP requirements.
Checktemp L models feature a round tip probe for liquid measurements.
EHI98501 (Checktemp® C) is supplied with penetration probe, protective cap, battery and instructions.

Specifications and manual for EHI98501

EHI98501
Probe thermometer, -50 to 150°C, accuracy 0.3°C
AUD77.00
ea
BACKORDER 
Thermometer with SS probe
EHI98509
Weighted probe on 3m cable
Weighted probe on 3m cable
HIGH ACCURACY THERMOMETER WITH 1M PROBE CABLE

Checktemp® 1 is a high accuracy thermometer with a stainless steel probe on a 1m flexible cable. This penetration probe is perfect for fast response in liquids, air, frozen and semisolid materials. It utilises a high-tech NTC thermistor sensor to measure the temperature. Thermistors make it possible to obtain extremely high accuracy in a very short period of time.
A calibration test device has been incorporated into the meter. Activate the "test" switch and this device will simulate a 0.0°C signal that has to be read on the LCD within a range of ±0.3°C. This assures the user that the reading is reliable and accurate, every time.
The sharp-tip probe easily penetrates semisolid products such as fruits, vegetables and cheese. Routine controls are fast and simple for both incoming and outgoing goods. Constructed of AISI 316 stainless steel material, this probe is in compliance with food regulations.
Checktemp® 1 is an ideal instrument for measuring temperature according to HACCP requirements.
EHI98509 (Checktemp® 1 C) is supplied with battery and instructions.

Specifications and manual for EHI98509

Also available: Checktemp® Dip (HI 98509-01) with a weighted probe on a flexible 3m cable, ideal for measurements in tanks.

EHI98509
Thermometer with SS probe, 1m cable, -50 to 150°C, accuracy 0.3°C
AUD81.75
ea
BACKORDER 
Waterproof K-type thermometer, dual range
EHI935005
General purpose probe
General purpose probe
WATERPROOF K-TYPE THERMOMETER

EHI35005 is a hand-held waterproof thermometer using a K-type sensor, together with an advanced microprocessor, to deliver accurate temperature measurement with an extraordinary 1600 hours battery life. Battery level indication with low battery warning and error prevention furnishes this metre with advanced battery management functions.
This unit displays current temperature along with the minimum and maximum extremes achieved during the session, on a dual-level LCD. A HOLD button provides the user time to record readings. The °C/°F button instantly switches between the Celsius and Fahrenheit ranges.
Select from a wide variety of interchangeable probes to meet you specific needs. Each probe measures 2 ranges of temperatures, -50.0 to 199.9°C and 200 to 1100°C depending on the probe. Probes are not included with the meter.

26 Thermocouple probes

For dimly lit areas, HI 935005N is your choice. HI 935005N features a user-activated backlight for low or no light conditions. The CAL button allows the operator to remove the combined metre and probe interchange error in an ice bath at 0°C, for added accuracy and reliability.
The HANNA® exclusive shockproof rubber boots, HI 710007 and HI 710008, offer maximum impact protection.
EHI935005 is supplied with batteries, protective case and instructions.

Specifications and manual for EHI935005
Specifications for EHIP766E1

Accessories
EHI710007 Shockproof Rubber Boot, Ergo Style Casing, Blue
EHI710008 Shockproof Rubber Boot, Ergo Style Casing, Orange

Probes
EHIP766C Penetration Thermocouple Probe - ask
EHIP766D Thermocouple Probes for Air & Gas - ask
EHIP766E1 General Purpose Thermocouple Probe

EHI935005
K-type thermometer, waterproof, dual range
AUD222.36
ea
BACKORDER 
EHIP766B
Surface temperature K-type thermocouple probe with stainless steel tube
AUD185.30
ea
BACKORDER 
EHIP766E1
General purpose probe, max. 900°C
AUD130.80
ea
BACKORDER 
Compact magnetic stirrer, round
Compact magnetic stirrer, round
COMPACT MAGNETIC STIRRER, ROUND

HANNA® EHI180 series is compact, lightweight, low-cost and round, without any sharp corners.
These stirrers incorporate electronic controls allowing the user to regulate the speed with greater precision. In addition to speed control, a Speedsafe mechanism ensures that the maximum speed will never be exceeded.
Available in nine colours: light yellow, light sea-green, light blue, yellow, green, dark blue, red, grey and ivory.
Several EHI180 stirrers can be placed on a laboratory bench, their colours help to identify the different samples.
The ABS cover will resist the harmful effects of accidentally spilt chemicals.
Maximum stirring capacity is 1 litre.
The EHI180 magnetic stirrer is supplied with micro stir bar and instructions.

Specifications and manual for EHI180

EHI180-Y
Magnetic stirrer, diam. 135 x H51mm, yellow
AUD234.90
ea
BACKORDER 
Compact magnetic stirrer, square
Compact magnetic stirrer, square
COMPACT MAGNETIC STIRRER, SQUARE

Common stirrers are manufactured with steel and aluminium components. These units are often too large and heavy to fit in the limited space of a laboratory. EHI190MB is compact and lightweight, so that lack of laboratory bench space is no longer a concern.
This stirrer incorporates electronic controls allowing the user to regulate the speed with greater precision. Often, in the lab, a sample is removed from the stirrer before reducing the speed which would cause the motor of conventional equipment to accelerate until it is destroyed. This is not the case with the HANNA® mini-stirrer. In fact, the internal Speedsafe mechanism will ensure that the maximum speed is never exceeded.
The ABS cover will resist the harmful effects of accidently spilt chemicals.
Maximum stirring capacity is 1 litre.
EHI190MB is supplied with micro stir bar and instructions.

Specifications and manual for EHI190MB

Also available: HI 200M has an AISI 316 stainless steel cover. This model is ideal for applications that create exothermic reactions.

EHI190MB
Magnetic stirrer, 120 x 120 x 45mm, with 12V adapter
AUD213.64
ea
BACKORDER 
Mini controllers

MINI CONTROLLERS

Mini controllers, level controllers, NEMA enclosures

Features

  • Compact size
  • Accurate and continuous monitoring
  • Large LCD display
e3add4
Mini controllers
ASK
Process instrumentation

PROCESS INSTRUMENTATION

Chlorine analysis, Agricare, panel advanced, panel basic, transmitters, wallmount, simulators

Features

  • Blackstone dosing pumps
  • Better accuracy and great repeatability
  • Common sense instrumentation
e3add5
Process instrumentation
ASK
Chemical test kits

CHEMICAL TEST KITS

Single parameter, multiparameter



  • Wide variety of parameters
  • Truly portable
  • Simple to use and cost effective
e3add6
Chemical test kits
ASK
Reagents

REAGENTS

e3add8
Reagents
ASK
Order Type / Payment Method / Address / Shopping Cart / Checkout