E840045 Electromagnetic field tester/Gauss meter
E840045 Electromagnetic field tester/Gauss meter
ELECTROMAGNETIC FIELD TESTER

Measures electromagnetic emissions from high voltage power transmission lines, large transformers, and large electric motors. This type of radiation may interfere with some scientific instruments - especially transmission electron microscopes. Some people are concerned about the effect of this type pf radiation. The evidence of the carcinogenic effect of such electromagnetic emissions remains inconclusive, and would only be a concern if doses are particularly high and children are exposed to this for extended periods.

Reads milli-Gauss and micro-Tesla on a large 32mm high display. The display indicates when the object being measured is out of range as well as when the battery is low. Features both standard and maximum hold. Powered by a standard 9V battery lasting approximately 100 hours.
Comes with battery, instructions, and a soft carrying case.
Dimensions: 130 x 56 x 38mm
Weight: 170g

Available with NIST traceable certificate of calibration - E840045C

Unit of MeasureRangeResolutionAccuracy

milli-Gauss
0.1 ~ 2000 mG0.1 ~ 1±2.5% + 3d
@50/60Hz

micro-Tesla
0.01 ~ 200μT0.01 ~ 0.1±2.5% + 3d
@50/60Hz

Optional accessories
E840090 Water resistant instrument pouch

E840045
Electromagnetic field tester/Gauss meter
AUD157.00
ea
ADD TO CART 
E840046 Broad range radio frequency meter
E840046 Broad range radio frequency meter
RADIO FREQUENCY EMISSIONS METER

Evaluate the Radio Frequency (RF) emissions of mobile phones, radio and TV transmission towers, wireless cameras, Wi-Fi and LAN detection and installation, microwave oven leakage and other environmental safety concerns. Designed for measuring and monitoring the electromagnetic field radiation intensity - radio frequency, including microwaves. Radio Frequency is the range of electromagnetic frequencies above the audio range and below infrared light.

Features maximum and minimum hold, an audible alarm, and a zero adjustment to eliminate background EMF. The display also indicates overload and low battery.
Comes with a soft carrying case and standard 9V battery, which provides approximately 100 hours of use.
Dimensions: 130 x 56 x 38mm
Weight: 170g
The metre is calibrated precisely on the frequency value of 2.45 GHZ.


Specifications
Display3¾ digits, maximum reading 3999
RF Power density0.003~2.700 mW/cm²
RF Frequency50MHz ~ 3.5GHz
Microwave frequency2450MHz
Resolution0.001mW/cm²
Accuracy±2dB @ 2.45GHz ±50MHz
AxisSingle
Alarm@ readings >1mW/cm²
Operating temperature5°C ~ 40°C
Operating RH<80% RH

Optional Accessories

E850000 Rubber instrument protector

E840046
Radio frequency meter, broad range
AUD254.00
ea
BACKORDER 
E800047 Oxygen meter
E800047 Oxygen meter
OXYGEN METER

Easily portable and designed for simple one-hand operation.
Reads oxygen in air for environmental studies, IAQ, bio-technology (for oxygen incubators and anaerobic cultivators), food storage and refrigeration, testing fire alarm and fuel cell systems. The fast, highly reliable, galvanic oxygen sensor is unaffected by acidic gases such as CO₂. Simultaneously displays O2 concentration and air temperature in °C or °F.
Features hold, min/max, a low battery indicator, ATC and auto-power-off.
Comes with 4 AAA batteries and a soft carrying case with a belt loop and shoulder strap.
Dimensions: 180 x 40 x 40mm
Weight: 175g

Specifications

 RangeResolutionAccuracy
O20 ~ 30%0.1%± (1% reading + 0.2% O2)
Temp0 ~ 50°C0.1°± 0.8°C
E800047
Oxygen meter, 0 - 30%
AUD455.00
ea
BACKORDER 
E850070 Compact environmental quality meter
E850070 Compact environmental quality meter
COMPACT ENVIRONMENTAL QUALITY METER

For environmental testing anywhere. Combines a light meter, humidity meter, thermometer, anemometer into a single compact unit weighing only 160g. Own the equivalent of 4 meters for about the price of any one of them. Features dual display with low battery and over range indications, touch-tone buttons, max-min, auto power off and hold functions. Comes ready to use with soft carrying case, wrist strap, instructions and a 9V battery.
Dimensions: 150 x 65 x 30mm
Weight: 160g

 RangeResolutionAccuracy
°C Ambient0~500.1±1.2°C
°C Type K-100~13000.1±(1% + 1°C)
RH10~95%0.1±6% 30 ~ 60RH otherwise ±8%
Airspeed
m/s
km/h
mile/h
knots
ft/min
0.4 ~ 25.0
1.4 ~ 90.0
0.9 ~ 55.9
0.8 ~ 48.6
80 ~ 4930
0.1
0.1
0.1
0.1
1
±(3% + 2d)
±(3% + 2d)
±(3% + 2d)
±(3% + 2d)
±(3% + 20ft/min)
Lux0~20,0001±(5% + 4d)
Foot candle0~2,0000.1±(5% + 4d)
E850070
Compact environmental quality meter
AUD214.00
ea
BACKORDER 
E850071 Environmental quality meter
E850071 Environmental quality meter
Anemometer probe
Anemometer probe
Metal anemometer probe
Metal anemometer probe
Mini extension anemometer probe
Mini extension anemometer probe
Relative humidity probe
Relative humidity probe
Light probe
Light probe
IR temperature probe
IR temperature probe
ENVIRONMENTAL QUALITY METER

Using interchangeable probes this versatile metre reads airspeed, temperature, RH and light. The user can order probes for the parameters currently required and add additional probes in the future. Intelligent probes electronically retain calibration information. No recalibration is required when changing probes. The display simultaneously reads temperature in user selectable °C & °F and all measurements are automatically temperature compensated. RS-232 port enables communication with a computer. Also features auto power off, hold and min-max. Fold out easel back and a tripod screw. Comes with 9V battery and a hardshell foam-lined carrying case with room for one or two probes.
Dimensions: (main unit):195 x 68 x 30mm
Weight: (main unit): 250g

Thermocouple probes
Type J and K thermocouple probes for the following applications:

  • Immersion and general purpose
  • Penetration
  • Surface
  • Ambient


Technical note - Thermocouple probes specifications
Ask for prices

 RangeResolutionAccuracy
Thermocouple Probes
Type K-50~1300°C0.1±0.2% +1°C
Type J-50~1150°C0.1±0.2% +1°C
Anemometer Probe E850072
M/s0.4~25.00.1±2% +2d fs
Km/h1.4~90.00.1±2% +2d fs
Mile/h0.9~55.90.1±2% +2d fs
Knots0.8~48.60.1±2% +2d fs
Ft/min80~49301±2% +20 ft/min
°C0~500.1±0.8°
Metal Anemometer Probe E850077
M/s0.5~40.00.1±2% +2d fs
Km/h1.8~144.00.1±2% +2d fs
Mile/h1.1~89.40.1±2% +2d fs
Knots1.0~78.10.1±2% +2d fs
Ft/min100~78801±2% +20 ft/min
°C0~600.1±0.8°
Mini Extension Anemometer Probe E850073
M/s0.4~12.00.1±2% +2d fs
Km/h1.4~43.20.1±2% +2d fs
Mile/h0.9~26.80.1±2% +2d fs
Knots0.8~23.30.1±2% +2d fs
Ft/min80~23581±2% +20 ft/min
°C0~500.1±0.8°
Humidity Probe E850074, with N.I.S.T tracable certificate of calibration E850074C
RH10%~95%0.1%>70%RH ±5%rdg +1%RH
<70%RH ±5%RH
°C0~500.1±0.8°
Light Probe E850075, with N.I.S.T tracable certificate of calibration 850075C
Lux2,0001±5%rdg +2d
Lux20,00010±5%rdg +2d
Lux50,000100±5%rdg +2d
Foot Candle2000.1±5%rdg +2d
Foot Candle2,0001±5%rdg +2d
Foot Candle5,00010±5%rdg +2d
IR Temperature E850076 D/S 7:1 Emissivity 0.95
°C-10~3001±3%rdg or ±3oC which ever is greater


Optional accessories
E840090 Water resistant instrument pouch
E840092 Bench-top tripod
E840093 Field tripod
E840057 RS232 1.2m cable. A standard RS232 cable is not sufficient, the instrument has a unique plug.
E840094 USB cable
E850080 Data acquisition software

Available with NIST traceable certificate of calibration - E850074C, E850075C

E850071
Environmental quality meter
AUD369.00
ea
BACKORDER 
E850072
Anemometer probe for E.Q. meter
AUD164.00
ea
BACKORDER 
E850073
Mini extension anemometer probe for E.Q. meter
AUD367.00
ea
BACKORDER 
E850074
Relative humidity probe for E.Q. meter
AUD121.00
ea
BACKORDER 
E850075
Light probe for E.Q. meter
AUD98.00
ea
BACKORDER 
E850076
IR temperature probe for E.Q. meter
AUD105.00
ea
BACKORDER 
E850077
Metal anemometer probe for E.Q. meter
AUD205.00
ea
BACKORDER 
E850068 Hybrid powered environmental quality meter
E850068 Hybrid powered environmental quality meter
RoHS and CE compliant
HYBRID POWERED ENVIRONMENTAL QUALITY METER

Parameters

  • Air speed
  • Humidity
  • Light
  • Temperature

A unique hand powered generator enables environmental quality measurements with or without batteries. Combines an anemometer, hygrometer, thermometer and light metre in a single rugged unit. Also reads any type-K thermocouple probe. The large dual LCD screen displays results and indicates low battery and out of range. Features touch-tone buttons, min/max, auto power off and hold functions. Comes ready to use in a foam lined hard shell carrying case with instructions, 9V battery, tripod back and a tripod screw.
Dimensions: 175 x 75 x 45mm
Weight: 415g

E850068RangeResolutionAccuracy
°C ambient0 ~ 500.1±1.2°C
°C Type K-100 ~ 1300±(1% + 1°C)
RH10 ~ 95%<70%RH ±4%
>70%RH ±(4% rdg + 1.2%RH)
Airspeed m/s0.4 ~ 25.0<20 m/s ±3% fs
>20 m/s ±4% fs
Airspeed km/h1.4 ~ 90.0
Airspeed mile/h0.9 ~ 55.9
Airspeed knots0.8 ~ 48.6
Airspeed ft/min80 ~ 49301
Lux0 ~ 2,000
1800 ~ 20,000
1
10
±5% rdg + 8d
Foot Candle0 ~ 204.0
170 ~ 1860
0.1
1


Optional accessories
E800060~77 Type-K thermocouple probes
E840090 Water resistant instrument pouch
E840093 Field tripod

E850068
Hybrid powered environmental quality meter
AUD356.00
ea
BACKORDER 
E850069 Environmental quality meter with sound
E850069 Environmental quality meter with sound
RoHS and CE compliant
ENVIRONMENTAL QUALITY METER WITH SOUND

Measures

  • Air speed
  • Humidity
  • Light
  • Sound
  • Temperature


Combines an anemometre, hygrometre, thermometre, sound and light metre in a single hand-held unit. Also reads any type-K thermocouple probe. Results are displayed on a large dual LCD screen with low battery and out of range indications. Features touch-tone buttons, min/max, auto power off and hold functions. Comes ready to use in a soft carrying case with RS232 computer port instructions, 6 AAA batteries, tripod back and a tripod screw.
Dimensions: 255 x 75 x 35mm
Weight: 330g

E850069RangeResolutionAccuracy
°C ambient0 ~ 500.1±1.2°C
°C Type K-100 ~ 1300±(1% + 1°C)
RH10 ~ 95%<70%RH ±4%
>70%RH ±(4% rdg + 1.2%RH)
Airspeed m/s0.4 ~ 30.0<20 m/s ±3% fs
>20 m/s ±4% fs
Airspeed km/h1.4 ~ 108.0
Airspeed mile/h0.9 ~ 67.0
Airspeed knots0.8 ~ 58.3
Airspeed ft/min80 ~ 59101
Lux0 ~ 2,000
1800 ~ 20,000
1
10
±5% rdg + 8d
Foot Candle0 ~ 204.0
170 ~ 1860
0.1
1
dB35 ~ 1300.125+5°C ±1.5dB


Optional accessories
E800060~77 Type-K thermocouple probes
E840057 RS232 cable
E840094 RS232 to USB adaptor cable
E840097 AC Adaptor
E840093 Field tripod
E850016 2-point acoustical calibrator
E850080 Software

Available with NIST traceable certificate of calibration - E850069C

E850069
Environmental quality meter with sound
AUD367.00
ea
BACKORDER 
Mini environmental quality meter
Mini environmental quality meter
MINI ENVIRONMENTAL QUALITY METER

Monitor up to 12 environmental parameters with one tiny instrument.
Light weight, tiny size with simple, one-hand, operation. All units read air speed in addition to the wide selection of environmental parameters listed below. Will sense airflow as low as
0.4 m/s. Replaceable snap-in anemometer vane. All models feature min/max, hold, a backlight and come complete with a wrist strap, carry pouch, and button cell battery. Model 850027
accurately measures liquid and solid temperatures using the optional Pt 1000 penetration probe.


 RangeResolutionAccuracyE850025E850026E850027
Wind speed80 ~ 3937 ft/min
0.4 ~ 20.0 m/s
1.4 ~ 72.0 km/h
0.9 ~ 44.7 mile/h
0.8 ~ 38.8 knots
32 ~ 122 °F (0 ~ 50 °C)
1 ft/min
0.1 m/s
0.1 km/h
0.1 MPH
0.1 knots
0.1 °F/°C
≤ 20 m/s: ± 3% F.S.
> 20 m/s: ± 4% F.S
Air temperature0 ~ 50 °C0.1 °C± 1.2 °C
RH10 ~ 95 %RH0.1 %RH< 70% RH: ± 4% RH
≥ 70% RH: ± (4% rdg +1.2% RH)
Air volumee 0.024 ~ 36000 CMM
0.847 ~ 1271300 CFM
0.001/0.01/0.1/1
0.001/0.01/0.1/1
/10 (x10)/100 (x100)
  
Wind chill-0.4 ~ 44.2 °C0.1 °C± 2.0 °C 
Heat stress index0 ~ 100 °C0.1 °C± 2.0 °C 
Dew point-25.3 ~ 49.0 °C0.1 °CCalculate from the humidity/temperature value 
Wet bulb-5.4 ~ 49.0 °C0.1 °CCalculate from the humidity/temperature value 
PT 1000 ohm probe (optional)-10.0 ~ 100.0 °C0.1 °C± 1.2 °C  
Barometric pressure10.0 ~ 999.9 hPa
1000 ~ 1100 hPa
7.5 ~ 825.0 mmHg
0.29 ~ 32.84 inHg
0.1 hPa
1 hPa
0.1 mmHg
0.01 inHg
± 1.5 hPa
± 2 hPa
± 1.2 mmHg
± 0.05 inHg
  
Altitude-2000 ~ 90000 m1 m± 15 m  
Visible light0 ~ 2200 Lux
1800 ~ 20000 Lux
0 ~ 204.0 Fc
170 ~ 1860 Fc
1 Lux
10 Lux
0.1 Ft-cd
1 Ft-cd
± 5% rdg ± 8 dgt  
E850025
Mini environmental quality meter
AUD176.00
ea
BACKORDER 
E850026
Mini environmental quality meter
AUD200.00
ea
BACKORDER 
E850027
Mini environmental quality meter
AUD281.00
ea
BACKORDER 
E850027P
PT1000 Temperature probe for mini wnvironmental quality meter 850027
AUD84.00
ea
BACKORDER 
ESB840022 Advanced light meter
ESB840022 Advanced light meter
ADVANCED LIGHTMETER

Monitor light levels anywhere with fast, stable and accurate response. Results are easily read on the extra large LCD (38.1mm) with bar graph, low battery and over range indications. The colour and cosine corrected sensor meets C.I.E. photopic spectrum. Offers peak function and a unique and very useful ability to compensate for the different colors of tungsten, fluorescent, mercury and sodium lights, with the push of a button. The result is readings true to actual lighting conditions. Also features RS232 computer output, max-min, auto power off, external zero adjustment, hold function and a tripod back. Comes ready to use with a 9V battery, instructions, soft padded case with shoulder strap, and a detachable sensor with cover for easier replacement or repair.
Meter dim.: 200 x 68 x 30mm
Weight: 280g

Available with NIST traceable certificate of calibration - E840022C

Optional accessories
E840057 RS232 cable. A standard RS232 cable is not sufficient, the instrument has a unique plug.
E850080 Software
E840090 Water resistant instrument pouch
E840092 Bench-top tripod
E840093 Field tripod

E850007 Visible light and temperature datalogger with SD card
E850007 Visible light and temperature datalogger with SD card
RoHS compliant
VISIBLE LIGHT DATALOGGER WITH SD CARD

Reads lux, foot candles and functions as a type K or J thermometer. Records data onto standard SD memory cards (like a digital camera). When full, simply exchange SD cards for unlimited data storage. The removable SD card is easy to transport and insert into a computer's memory card slot or SD card adapter. Uploads preformatted data to Excel, without the need for software and cables. Additional SD cards are readily available in a variety of memory sizes. Can also manually record 99 readings for on-screen review or stream data directly to a computer using the optional software and cables.
Each data set includes lux or foot candle reading, time and date. Features push button zero adjustment, min/max, auto power off, low battery indicator and hold function.
This well made unit is extremely accurate with fast response times, and includes a fold-out tripod and large easy-to-read backlit LCD.
Comes ready to use in a soft carrying case complete with a detachable colour-corrected probe that meets the C.I.E. photopic spectrum, 6 AA batteries, instruction manual and a 2GB SD card.
Dimensions: 177 x 68 x 45mm
Weight: 489g

Optional accessories
E800060~77 Type K thermocouple probes
E840057 RS232 computer cable
E840059 Additional 2GB SD card
E840090 Water resistant instrument pouch
E840093 Field tripod
E840094 USB computer cable
E840097 AC adaptor
E850080 Software

 RangeRes.Accuracy
Lux2,0001± (4%+2 dgt) rdg
20,00010
100,000100
Foot Candle2000.1
2,0001± (4%+2 foot candle) rdg
10,000110± (4%+20 foot candle) rdg
Type K-50 ~ 1300°C0.1± (0.4% + 1°C ) fs.
Type J-50 ~ 1200°C


E850007C comes with NIST traceable certificate of calibration.

E850007
Visible light/temp. datalogger with SD card
AUD311.00
ea
BACKORDER 
E850007C
Visible light/temp. datalogger with SD card, certified
AUD363.00
ea
BACKORDER 
UV light meter
UV light meter
RoHS compliant
UV LIGHT METERS

Applications

  • Measure damaging UV (ultraviolet) light in the environment and museums.
  • UV degradation studies in the pharmaceutical, cosmetic, semiconductor, printing, window tinting and other industries.
  • Laboratory chromatography, electrophoresis and forensics.
  • Test UV sterilisation and dermatology lamps in hospitals.


UV light intensity appears on the large backlit display in either µW or mW/cm² while the small lower display simultaneously shows minimum, maximum, average and recorded data. Up to 20 data points can be recorded automatically at a variety of intervals. Features zero point reset, hold and low battery indicator.
Comes in a protective, hard foam lined carrying case complete with a UV probe, tripod screw, magnetic mount and a 9V battery.
Model E850009 measures long and medium wave UV-A/B for applications such as forensics, chromatography, electrophoresis and dermatology.
Model E850010 measures short wave UV-C light for applications such as UV light fume hoods, UV sterilisation, industrial glass and non-destructive testing.
Dimensions: 145 x 55 x 40mm
Weight: 135g

Available with NIST traceable certificate of calibration - E850009C and E850010C

Cat. No.WavelengthCalibration PointUV RangeResolutionAccuracy
E850009280 ~ 400 nm365 nm1 µW/cm² ~
40.00 mW/cm²
1 µW and
0.01 mW/cm²
±4% ±1 digit
(@23 ±5°C)
E850010220 ~ 275 nm254 nm


Optional accessories
E840090 Water resistant instrument pouch
E840092 Bench-top tripod
E840093 Field tripod

E850009
UVA/B Light meter
AUD267.00
ea
BACKORDER 
E850010
UVC Light meter
AUD762.00
ea
BACKORDER 
E850023 Anemometer and temperature datalogger with SD card
E850023 Anemometer and temperature datalogger with SD card
RoHS Compliant
ANEMOMETER/ TEMPERATURE DATALOGGER WITH SD CARD

Reads air velocity and temperature and functions as a type K or J thermometer. Records data onto standard SD memory cards. When full, simply exchange SD cards for unlimited data storage. The removable SD card is easy to transport and insert into a computer's memory card slot or SD card adapter. Uploads preformatted data to Excel, without the need for additional software and cables. Additional SD cards are readily available in a variety of memory sizes.
Can also manually record 99 readings for on-screen review or stream data directly to a computer using the optional software and cables.
Each data set includes air speed, air temperature, time and date. Features min/max, auto power off, low battery indicator and hold function.
This well made unit is extremely accurate with fast response times, and includes a fold-out tripod and large easy-to-read backlit LCD.
Comes ready to use in a soft carrying case complete with a detachable probe, 6 AA batteries, instruction manual and a 2GB SD card.
Dimensions: 177 x 68 x 45 mm
Weight: 489g

Optional accessories
E800060~77 Type K thermocouple probes
E840057 RS232 computer cable
E840059 2GB SD card
E840090 Water resistant instrument pouch
E840093 Field tripod
E840094 USB computer cable
E840097 AC adapter
E850080 Software


 RangeRes.Accuracy
Ft/min79 ~ 68901± (2%+40 FPM) rdg
Km/h1.4 ~ 1260.1± (2%+0.8 Km/h) rdg
mph0.9 ~ 78.3± (2%+0.4 mph) rdg
Knots0.8 ~ 68± (2%+0.4 Knots) rdg
m/S0.4 ~ 30± (2%+0.2 m/S) rdg
Type K-50 ~ 1300°C± (0.4% + 1°C ) fs.
Type J-50 ~ 1200°C
E850023
Anemometer/temp. datalogger with SD card
AUD460.00
ea
BACKORDER 
Hot Wire Anemometer SD Card Logger
Hot Wire Anemometer SD Card Logger
HOT WIRE ANEMOMETER DATALOGGER WITH SD CARD

Reads air velocity and temperature and functions as a type K or J thermometer. Records data
onto removable, standard SD memory cards (like a digital camera). When full, simply exchange SD cards for unlimited data storage. The removable SD card is easy to transport and insert into a computer's memory card slot or SD card reader. Uploads pre-formatted data to Excel, without the need for additional software and cables. Additional SD cards are readily available in a variety of memory sizes. Can also stream data directly to a computer using the optional software and cables. Each data set includes air speed, air temperature, time and date. Features min/max, auto power off, low battery indicator and hold function. This well made unit is extremely accurate with fast response times, and includes a fold-out tripod and large, easy-to-read backlit LCD. Comes ready to use in a soft carrying case complete with a detachable telescopic probe, 6 AA batteries, instruction manual and a 2GB SD card.
Dimensions: 177 x 68 x 45 mm. weight: 460 g.

 RangeResolutionAccuracy
Ft/min40 - 39401± (1%+20 fpm) fs
Knots0.4 - 38.80.01 - 0.1± (1%+0.2 Knots) fs
m/S0.2 - 25.0± (1%+0.1 m/S) fs
Km/H0.7 - 72.0± (1%+0.3 Km/h) fs
mph0.5 - 44.7± (1%+0.2 mph) fs
Type K-50 - 1300°C0.1± (0.4% + 1°C ) fs
Type J-50 - 1100°C
Air tempture0 - 50°C0.8°C


Optional accessories
E800060-77 Type K Thermocouple Probes
E840057 RS232 Computer Cable
E840059 2GB SD Card
E840090 Water Resistant Instrument Pouch
E840093 Field Tripod
E840094 RS232 to USB Adaptor Cable
E840097 AC Adaptor
E850080 Software

E850024
Hot wire anemometer, with SD card logger
AUD588.00
ea
BACKORDER 
E234 Handi-Vac® coverslip pick-up tool
E234 Handi-Vac® coverslip pick-up tool
Handi-vac coverslip pick-up tool
HANDI-VAC® COVERSLIP PICK-UP TOOL

Simple and effective: a finger-actuated mini vacuum bellow with 12.5mm straight tip and 9.3mm silicone cup.


Features

  • ESD safe rubber body
  • Will pick up and hold up to 35g
  • Easily picks up cover glasses, mica or silicon discs for accurate placement
  • No-scratch silicone rubber cup
  • More user friendly than conventional metal tweezers
E234
Handi-Vac® coverslip pick-up tool
AUD32.00
ea
ADD TO CART 
E230 Pen-Vac™ vacuum pick-up tool with 6 probes and cups
E230 Pen-Vac™ vacuum pick-up tool with 6 probes and cups
PEN-VAC™

Pen-Vac™ gives a superior means for the handling of small, flat surface objects. Pen-Vac is ideal for electron microscopy and histology work. It can be used to move grids, pick up stubs, align membranes, work with glass slides, cover slips and much more. Additionally, Pen-Vac is useful in the electronics assembly industry, for jewellers, model builders etc.

Features

  • Lifts up to 50 grams
  • Totally self-contained vacuum
  • Light-weight: less than 30 grams
  • Fits into a pocket like a pen
  • Brushed aluminium body
  • Storage compartment in handle for vacuum tips and cups
  • No power supply needed
  • Available in various sizes
  • Interchangeable vacuum probes


Pen-Vac™ is supplied with:
A variety of vacuum probes, with attached vacuum cup, straight and angled to suit your applications. The stainless steel needles of the probes are 12mm long. Vacuum cups are made of silicone.

Set consists of:
One pen with 3 angled and 3 straight probes and matching cups, 2 cups per size, 3.2, 6.4 and 9.5mm. Replacement cups are available in 7 sizes.

ESD-safe Pen-Vac™ with accessories is available as well.

E230
Pen-Vac™, vacuum pick-up tool with 6 probes and cups
AUD110.00
ea
ADD TO CART 
E2301
Probes and cups for Pen-Vac™, 3.2mm
AUD26.00
pk/2
ADD TO CART 
E2302
Probes and cups for Pen-Vac™, 6.4mm
AUD24.00
pk/2
ADD TO CART 
Vacuum pick-up system with pump
E232
Vacuum pick-up system with pump
Vacuum pick-up system probes and cups
Probes and cups
VACUUM PICK-UP SYSTEM WITH PUMP

Vacuum pick-up system including pump, finger control pen, five interchangeable tips (12, 16, 18, 20 and 25 gauge), 3 ea. clear silicone rubber vacuum cups (3.6mm, 6.4mm, 10mm), in-line filter and hose.
Handle and transport grids and wafers without the use of tweezers. Use this system for picking up delicate lightweight material with finger-controlled vacuum. Attach various hollow needle tips (5 with system) or rubber cups (3 with system) the pick-up pen. Use easy finger control for picking up or releasing.

Not for wet or corrosive materials.

Note: The Pen-Vac™ probes are interchangeable with the E232 vacuum pick-up probes. The E232 vacuum pick-up system has a vacuum spec of 8" Hg. This equates to a suction force of 2.75g/mm². To avoid cup deformation and leakage, use the following table to determine the practical lifting capacity for the cups and tips.

Cup or tip sizeSize in mmLifting capacity in g
Vacuum cup 0.4"10.1670
Vacuum cup 0.25"6.3535
Vacuum cup 0.14"3.5610
Tip, 12 gauge2.775
Tip, 16 gauge1.651
Tip, 18 gauge1.270.5
Tip, 20 gauge0.90.3
Tip, 25 gauge0.520.05

Replacement pen, probes, cups, pump, filter and tubing are available.

E232
Vacuum pick-up system with pump
AUD269.00
ea
ADD TO CART 
UV Pen light
ESA330005
UV LIGHT PEN

This pen light uses new solid-state LED technology to offer a portable source of UV light built into a slim attractive pen. This new technology has a number of significant advantages over older products using UV fluorescent tubes and light bulbs.

Features

  • A more compact, rugged and easily portable product, perfect for fieldwork.
  • The 400nm output is just on the edge of the visible light spectrum, low enough to cause fluorescence yet inherently safer than lower UV wavelengths.
  • Much longer battery life eliminates the need for power cords and battery packs. Powered by only four button cell batteries (included).
  • Immediate output, no warm-up time.
  • Much lower cost.


Specifications
Light source: high intensity InGaN LED
Wavelength: peak:400, Min:390, Max:410
Output power: 12,000 mW/M2
Optical rise time: 30 t, ns. Typical
Operating temperature: -4~176°F
Dimensions: 135 x 10mm
Weight: 30g with batteries

See also page P3 for more UV equipment and supplies.

ESA330005
Pen light, UV
AUD41.00
ea
ADD TO CART 
ACCESSORIES FOR SPER SCIENTIFIC INSTRUMENTS
RS232 Cable for connecting meters to a computer or printer
RS232 Cable for connecting meters to a computer or printer
RS232 CABLE FOR SPER INSTRUMENTS

RS232 1.2m cable. For Sper instruments that have a unique plug (a standard RS232 cable is not sufficient).

E840057
RS232 cable for Sper instruments
AUD44.00
ea
BACKORDER 
USB to Serial (RS232) adapter cable
USB to Serial (RS232) adapter cable
USB SERIAL ADAPTER

For Sper Scientific meters

Enables all Sper Scientific meters with RS232 ports to be plugged into any computer's USB port. Compatible with Windows 95, 98, 98ME, 2000, XP. Comes with instructions and a CD containing drivers.


For meters: E800002, E800005, E800006, E800008, E800010, E800014, E800022, E800023, E800024, E800043, E800050, E800052, E800054, E800056, E840001, E840002, E840003, E840012, E840013, E840020, E840022, E840028, E840032.

E840094
RS232 to USB adapter cable
10% DISCOUNT FOR 1
AUD1210.80
ea
ADD TO CART 
Software for Sper Scientific meters
SOFTWARE FOR SPER SCIENTIFIC METERS

Compatible with many of our meters including but not limited to:
E800037 WBGT SD Card Logger
E800021 RH/Temp SD Card Logger
E800043 Ultimate Thermometer
E840002 Datalogging Hotwire CFM Anemometer
E840012 Detachable Probe Sound Meter
E840022 Advanced Light Meter
E840057 RS232 Cable (840020 & 840022 Only)
E840060 Force Gauge w/ RS202 Out
E840062 Torque Meter
E840063 Vibration Meter
E840064 Vacuum Meter
E850023 Anemometer SD Card Logger
E850024 Hot Wire Anemometer SD Card Logger
E850007 Visible Light SD Card Logger
E850060 pH SD Card Logger
E850069 Environmental Quality w/ Sound

E850080
Software, for sper scientific meters
AUD80.00
ea
BACKORDER 
Datalogging software
Datalogging software
SOFTWARE FOR SPER SCIENTIFIC METERS

The RS232 software is used with the following products for logging data and further analysis:

  1. K.J.T or K.J.T.R.S.E.type thermometer
  2. pH /mV meter
  3. Hygro-thermometer & psychrometer
  4. Digital sound level meter
  5. Anemometer
  6. Manometer
  7. Conductivity meter
  8. IR Psychrometer
  9. D.O. Meter

Suitable for other meters with a RS232 interface feature. This software is user-friendly.


Features
  • Up to 10,000 sample readings with real-time clock memory.
  • Programmable sample interval from 1 second to 3,600 seconds.
  • User-defined maximum (High) and minimum alarm (Low) setting.
  • Allow further analysis by downloading data to computer program.
  • To assist data analysis and process control, all data is saved in text format (.txt) and can be easily transformed for use by Microsoft Office software application.

Supplied with a CD ROM, RS232 cable with D-sub connector, and an operation manual.

E840052
Data logging software
AUD82.00
ea
BACKORDER 
Bench top tripod
Bench top tripod
Pocket size laboratory tripod
BENCH-TOP TRIPOD

Pocket size tripod is stable when open yet folds to only 127 x 38 x 13mm for easy carrying and storage. Weighs under 57g. Usage height: 89mm. Both tripods fit any metre with a threaded tripod attachment.

E840092
Bench-top tripod
AUD25.00
ea
BACKORDER 
Field tripod
Field tripod
FIELD TRIPOD

Lightweight at only 1kg, yet strong and stable. Fliplever legs quickly lock into place at any height up to 1.47m and quickly fold down to 0.53m for carrying and storage. The height can be further adjusted with a geared, cranked elevator column. Features a 3-way adjustable head, self-levelling swivel feet, a bubble-level, carrying handle and an accessory hook. Comes in a zippered carrying case with a handle.

E840093
Field tripod
AUD114.00
ea
BACKORDER 
Water resistant instrument pouch
E840090
WATER RESISTANT INSTRUMENT BAG

Fits all Sper Scientific Meters and helps protect them from the elements during field work. The pouch enables the user to read and operate the instrument inside while the probe extends outside. Has a carrying strap and a velcro sealed top.
Dimensions: 229 x 178mm
Warranty: 90 days

E840090
Water resistant instrument pouch
50% DISCOUNT FOR 1
AUD2512.50
ea
ADD TO CART 
Sper Scientific rubber instrument protector
INSTRUMENT CASE

This rubber boot helps protect Sper Scientific instruments from shock and abrasions.
Fits the following meters: E800004, E800007, E840045, E840046, E850014

E850000
Rubber instrument protector
60% DISCOUNT FOR 1
AUD187.20
ea
ADD TO CART 
Order Type / Payment Method / Address / Shopping Cart / Checkout